Конфигуратор - Hes Configurator

info@hes-co.com

Лидер за България в проектирането и производството на хидравлични цилиндри от 1968 година

Език:
BG
EN
DE

Как да поръчам
Контакти
Вход / регистрация
0

Назад

Конфигурирай Мотори MAP 50

01

Mounting Flange

B — SAE B - 2-Bolt flange spigot diam. 101,6 mm [4“] - BC 146 mm [5.75”]

02

Port Type

omit — Side ports on opposite side

T — Twin (Two) side ports on one side + 23.04 EUR

E — Rear ports + 20.75 EUR

03

Displacement Code

35 — cm. /rev. 36.16 [2.21 in. /rev.]

40 — 41.59 cm. /rev. [2.54 in. /rev.]

46 — 47.13 cm. /rev. [2.88 in. /rev.]

50 — 49.94 cm. /rev. [3.05 in. /rev.]

04

Shaft Extensions

**The permissible output torque for shafts must not be exceeded!

SD — ø21,72 [0.855"] Spline SAE 13T 16/32 DP, M8 + 24.03 EUR

GD — ø21,72 [0.855"] Spline SAE 13T 16/32 DP, 5/16-18 UNC-2B thread + 24.03 EUR

SF — ø24.9 [0.98"] Spline SAE 15T 16/32, М8-6H + 26.29 EUR

GF — ø24,9 [0.98"] Spline SAE 15T 16/32, 3/8-16UNC-2BH + 26.29 EUR

SH — ø29.6 [1,165"] Spline W30x2x30x14x9g,М10-6H + 26.29 EUR

SK — ø31,75 [1,25"] Spline SAE 14T 12/24 DP, M10 + 28.55 EUR

GK — ø31,75 [1,25"] Spline SAE 14T 12/24 DP, 7/16-14UNC-2B thread + 28.55 EUR

CK — ø22.2 [ø7/8“] Straight, M8-6H thread Parallel key 1/4"x1/4"x1" BS46

MK — ø22.2 [ø7/8“] Straight, M8-6H thread Parallel key 1/4"x1/4"x1_1/2" BS46

ML — ø25 [ø0.984“] Straight, M8-6H thread Parallel key A8x7x25 DIN6885

CM — ø25.4 [ø1“] Straight, M8-6H thread Parallel key 1/4"x1/4"x1" BS46

DO — ø28.75 [ø1.125“] Straight, 3/8-16UNC-2B Parallel key 5/16"x5/16"x1_1/4" BS46

CQ — ø30 [ø1.181“] Straight, M8-6H, key Parallel key A8x7x32 DIN6885

DR — ø31.75 [ø1.25“] Straight, 3/8-16UNC-2B Parallel key 5/16"x5/16"x1_1/4" BS46

CS — ø32 [ø1.26“] Straight, M8-6H thread Parallel key A10x8x45 DIN6885

TD — ø22.22 [7/8"] Tapered 1:8 [125:1000], Parallel key 1/4"x1/4"x1", 5/8-18 UNF-2A + 15.02 EUR

TH — ø25.4 [1"] Tapered 1:8 [125:1000], Parallel key 1/4"x1/4"x1", 3/4-16 UNF-2A + 18.79 EUR

KH — ø25.4 [1"] Tapered 1:8 [125:1000],Parallel key 1/4"x1/4"x1", M16x1.5 + 15.02 EUR

05

Port Size

omit — 2xISO 6162-2 DN19, drain port M18x1,5

2 — 2xG3/4, drain ports G1/2

3 — 2xМ27x2, drain ports M18x1,5-6H

4 — 2x1_1/16 -12 UN, drain ports 7/8-14 UNF

5 — 2xSAE 3/4" PSI6000, drain port 7/8-14 UNF

6 — 2xG1/2, drain ports G1/2

*Option 6;7 and 8 are not available for Pos.2 option omit

7 — 2xМ22x1.5, drain ports M18x1,5-6H

*Option 6;7 and 8 are not available for Pos.2 option omit

8 — 2x7/8-14 UNF Ports, drain ports 3/4-16 UNF

*Option 6;7 and 8 are not available for Pos.2 option omit

9 — 2xISO 6162-2 DN19, drain port G1/2

06

Seal, Corrosion Resistant Seal Surface

omit — NBR seal type material

V — FKM seal type material + 20.15 EUR

07

Integrated Valves

omit — None

HR — Single anti-cavitation valve + 103.96 EUR

*Option DAR,DARF,DARP,SAR, AR and HR are not available for Pos.2 option E

AR — Dual anti-cavitation valve + 129.95 EUR

*Option DAR,DARF,DARP,SAR, AR and HR are not available for Pos.2 option E

PU — Purge valve - default - 6±2 l/min. + 155.94 EUR

FLU — Flush valve - default - 6±2 l/min at 20 bar + 186.26 EUR

SAR — Single anti-cavitation and relief valve + 127.35 EUR

*Option DAR,DARF,DARP,SAR, AR and HR are not available for Pos.2 option E

DAR — Dual anti-cavitation and relief valve + 181.93 EUR

*Option DAR,DARF,DARP,SAR, AR and HR are not available for Pos.2 option E

DARP — Dual anti-cavitation, relief and purge valve, default flow - 6±2 l/min + 337.86 EUR

*Option DAR,DARF,DARP,SAR, AR and HR are not available for Pos.2 option E

DARF — Dual anti-cavitation, relief and flush valve, default 6±2 l/min at 20 bar + 368.19 EUR

*Option DAR,DARF,DARP,SAR, AR and HR are not available for Pos.2 option E

08

Valve’s Port for Single Valves

omit — None

A — Port A

*Not available when selected omit,PU, FLU, DAR, AR, DARP и DARF on pos.7

B — Port B

*Not available when selected omit,PU, FLU, DAR, AR, DARP и DARF on pos.7

09

Pressure Setting of Integrated Valves

omit — Default

10

Flow Setting of Integrated Valves

omit — default 6

11

Special Features*

Available on enquiry

omit — None

R2S — Speed Sensor Two Directional + 218.7 EUR

R — Reverse Rotation

12

Paint and Coating

Available on enquiry. If a painting option is required, the standard color is blackAlkyd-Styrenated Enamel, Black RAL 9005. Other color by customer’s request

omit — No paint or coating

P — Painted + 20 EUR

PC — Corrosion protected paint + 24 EUR

PS — Special painted *** + 24 EUR

****Non painted feeding surface

PCS — Special corrosion protected paint*** + 28 EUR

****Non painted feeding surface

13

Design Series

omit — Factory specified

Мотори MAP 50

MAP

B

1

2

3

4

5

6

7

8

omit

9

omit

10

11

12

omit

13

Hes Configurator © 2025

Общи условия | Поверителност | Гаранционни условия | Проследи пратка

Начало
Конфигурирай
Количка
Помощ
Контакти

Преглед

MAP B

MAP B,,,,,,,,omit,omit,,,omit